VE3RD 2.4″ Nextion Screen
Features – 2.4″ Screen
- 10 Profiles a) Toggle to scroll through ten profiles, and a screen to list what each profile will do,
- DMRGateway Control, Set Startup Network,Logging Options
- DMR Master Server Control
- ModeHang control – 10 main mode hang parameters
- Mode Control (x5)
- CrossMode Control via profile, or screen (DMR2YSF,DMR2NXDN,YSF2DMR,YSF2NXDN,YSF2P25)
- Screen to set/change cross mode targets
- Screen Calibrator
- Info Screen software version numbers
- Flash Screen allows loading screens by either EA7KDO or VE3RD
- DMR Voice Control – Requires the VE3RD DMRGateway-1
Installation
Log into Pi-Star via SSH
type
rpi-rw
sudo git clone https://github.com/ve3rd/Nextion
cd ./Nextion
sudo ./gitcopy.sh NX3224K024 VE3RD
go to the flash page on your screen and press FLASH
or if this is a new install with neither EA7KDO or VE3RD screens loaded try the command line flash
cd /home/pi-star/Scripts
sudo ./flash2.sh
(It should locate your NX*.tft file, accept it and press OK/Enter
Updates can be done using the [Get RD] Button on the Flash Screen
It will notify you when ready to flash (approx 10 seconds)
#######################################
Some VE3RD Screens in the photo gallery below
Photo Galery Operation
A) Click on a picture to open it up
B) Click on the tiny blue i button centered below the picture.
Leave a Reply
You must be logged in to post a comment.